Inicio Gestión de la energía Reguladores conmutados CC/CC Reguladores elevadores (boost) Convertidores boost (interruptor integrado)
Inicio
Gestión de la energía
Reguladores conmutados CC/CC
Reguladores elevadores (boost)
Convertidores boost (interruptor integrado)
NUEVO

TPS61299-Q1

ACTIVO

100nA Iq 5.5V boost converter with input current limit and fast transient performance

Haga su pedido ahora
Hoja de datos

TPS61299-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Topology Boost Vin (min) (V) 0.5 Vin (max) (V) 5.5 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Switch current limit (typ) (A) 1.5 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 3000 Iq (typ) (mA) 0.0001 Features Bypass Mode Pass-through Mode, Enable, Load Disconnect, UVLO Fixed TI functional safety category Functional Safety-Capable Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 125 Rating Automotive
Topology Boost Vin (min) (V) 0.5 Vin (max) (V) 5.5 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Switch current limit (typ) (A) 1.5 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 3000 Iq (typ) (mA) 0.0001 Features Bypass Mode Pass-through Mode, Enable, Load Disconnect, UVLO Fixed TI functional safety category Functional Safety-Capable Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 125 Rating Automotive
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Input voltage range: 0.5V to 5.5V
  • 0.7V minimum input voltage for start-up
  • Input operating voltage down to 150mV with signal VIN > 0.7V
  • Output voltage range: 1.8V to 5.5V VSEL pin select output voltage
  • Average input current limit: 1.2A
  • 95nA typical quiescent current from VOUT
  • 60nA typical shutdown current from VIN and SW
  • Up to 91% efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 10µA
  • Up to 94 % efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 200mA
  • True disconnection at EN low
  • Automatic PFM/PWM mode transition
  • Auto pass-through at VIN > VOUT
  • Output SCP and thermal shutdown protections

  • SOT563 package (1.6mm x 1.6mm)
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Input voltage range: 0.5V to 5.5V
  • 0.7V minimum input voltage for start-up
  • Input operating voltage down to 150mV with signal VIN > 0.7V
  • Output voltage range: 1.8V to 5.5V VSEL pin select output voltage
  • Average input current limit: 1.2A
  • 95nA typical quiescent current from VOUT
  • 60nA typical shutdown current from VIN and SW
  • Up to 91% efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 10µA
  • Up to 94 % efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 200mA
  • True disconnection at EN low
  • Automatic PFM/PWM mode transition
  • Auto pass-through at VIN > VOUT
  • Output SCP and thermal shutdown protections

  • SOT563 package (1.6mm x 1.6mm)

The TPS61299-Q1 is a synchronous boost converter with 95nA ultra-low quiescent current and average input current limit. The device provides a power solution for portable equipment with alkaline battery and coin cell battery. This device operates at high efficiency under light-load condition to achieve long operation time and average input current limit can avoid battery discharging with high current.

The TPS61299-Q1 has wide input voltage range from 0.5V to 5.5V and output voltage range from 1.8V to 5.5V. The average input current limit of this device is 1.2A. The TPS61299-Q1 with 1.2A current limit can support up to 500mA output current from 3V to 5V conversion and achieve approximately 94% efficiency at 200mA load.

The TPS61299-Q1 has optional fast-load transient performance at output voltage is 4.5V, 5V, or 5.5V.

The TPS61299-Q1 supports true shutdown function when it is disabled.

TThe TPS61299-Q1 offers a very small solution size with 1.6mm × 1.6mm SOT563 package.

The TPS61299-Q1 is a synchronous boost converter with 95nA ultra-low quiescent current and average input current limit. The device provides a power solution for portable equipment with alkaline battery and coin cell battery. This device operates at high efficiency under light-load condition to achieve long operation time and average input current limit can avoid battery discharging with high current.

The TPS61299-Q1 has wide input voltage range from 0.5V to 5.5V and output voltage range from 1.8V to 5.5V. The average input current limit of this device is 1.2A. The TPS61299-Q1 with 1.2A current limit can support up to 500mA output current from 3V to 5V conversion and achieve approximately 94% efficiency at 200mA load.

The TPS61299-Q1 has optional fast-load transient performance at output voltage is 4.5V, 5V, or 5.5V.

The TPS61299-Q1 supports true shutdown function when it is disabled.

TThe TPS61299-Q1 offers a very small solution size with 1.6mm × 1.6mm SOT563 package.
open-in-new Buscar otro/a Convertidores boost (interruptor integrado)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TPS61299-Q1 95nA Quiescent Current, 5.5V Boost Converter with Input Current Limit and Fast Transient Performance datasheet PDF | HTML 24 ago 2023
Functional safety information TPS61299-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 31 ene 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Solicitar
Paquete Pasadores Descargar
SOT-5X3 (DRL) 6 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación MSL / reflujo máximo
  • Estimaciones de MTBF/FIT
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan "tal como está" TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el embalaje o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos